With the few parts still be fitted to the cab now weathered...
...it was time to think about putting some glazing in the cab. First off I needed to remove the masking tape from the inside of the cab which went remarkably uneventful!
With the masking out of the way I painted the inside of the glazing with Tamiya Clear Green to simulate the tinted windows that I have seen on the real vehicles. Before fitting though I cut suitably shaped masks for the windscreens to simulate the wiper coverage so that when I mist a coat of dirt over the vehicle I will get that clear area on the glass where the windscreen wiper blade would keep the glass clean.
This is just a test fit and I will test fit all the glazing before gluing - just in case!
No comments:
Post a Comment