A floating shunter!

More progress with the scenic sub-bases and this time I am creating the retaining walls to go around the cut out in the landscape where the signal box will be. All I need is card cut to size and then cover it with brick paper - just like this.....

Once the glue is all dry and the brick paper trimmed to size it will fit into the cut out something like this.....

I still need to give the vegetation a hair cut on this sub-base but I wanted to wait until the walls were fitted before doing that.

Despite Mrs. Woody's list of jobs I have had time for a few bike rides and I was passing the local canal where much activity was in progress.

Regular readers will know that I blogged earlier this year about the canal drying up to a trickle and the abundant growth of vegetation that took place.

Well, much of that growth has gone as the canal workers take advantage of restored water levels to dredge the area. fascinating to see the process with various vessels used along with excavators. All the dredged material is put into the open boat which I think technically is known as a butty. That is then towed to the right hand bank where the other excavator digs it out and places it in the large trench that has been dug - presumably to dry out before something else happens to it.

I was quite taken by the small boat which from a distance looks like a floating diesel railway shunter from the Rocks By rail Museum. In effect it is a shunter as it shunts the butty from one side of he canal to the other. A close up also revealed its fitting canal like name of Heron.

Wonder what it would look like on rails?

Hair cut sir?

 Although Mrs. Woody will gently 'hint' when I need a hair cut, I am not in need at the moment or at least there have been no hints given! However, the scenic sub-bases do indeed need a hair cut. With the  hanging basket liner glued in place and glue now dry it was time for that hair cut. Now my hair cut method would not see me employed at a top salon, but for the liner it works well. Firstly, the top layer was gently ripped off leaving a mix of different length strands and colours much like the wild vegetation that I am trying to create. You can see what was removed in the picture below.

It was a little too wild though....

....so my hair cutting implements came out - scissors and instead of a hair dryer a vacuum cleaner!

 

The scissors trimmed whilst the vacuum cleaner pulled out the strands that did not fall off and I was left with a 'manicured' wilderness! Looks good though and just needs some additional shrubbery adding to add further realism and with my current vegetational butchery of the bone yard at the Rocks By Rail Museum I feel I have gained useful knowledge on such matters!

Now I wonder if anyone needs a hair cut whilst I have my implements out? Hair cut sir????

The hair bear bunch!

Well maybe not so much the hair bear bunch but definitely the hairy landscape bunch! To bring the impression of unkempt and wild vegetation, which is something I am getting very familiar with at the Rocks By rail Museum, I am using hanging basket liner on the scenic sub-bases. The liner is made up of recycled fibres presumably from old clothes which makes a great representation of wild vegetation. Simply glue the liner to the areas that need wilding and wait for the glue to dry after which the top layer can be pulled off leaving the vegetation!

PVA is applied to the surfaces and the liner is pressed into it.

Even without any other work, the landscape already looks more natural.

All three sub-bases have been done now so it is time to let the glue dry.

Real imitation rock!

Things move on as the scenic sub-bases get a coat of plaster sculptured to look like rock or as I like to call it, real imitation rock! My usual method was used, with plaster mixed with some PVA, brown paint and water to a semi sloppy mix and then applied with a stiff paint brush in a stippling motion.

That lot just needs to dry now which with the warmer weather hopefully will not take too long. And as we have relative warmth outside I also primed the 3D printed signal box so that is ready to be painted up.

From contour maps to landforms.

 With my latest capers in polystyrene ready to be carved to shape I set to in the Man Cave - too much mess to do inside the house and I think Mrs. Woody might have words to say! There was a scene like a snowstorm having finished shaping the two sub-bases but I cleared it up and was left with these.

Looking a little more like landforms then a contour map, the next step is the plaster impregnated bandage.

So far one is done and the other about a quarter done. Coming on though which is always a plus point! And whilst it may have been snowy inside the Man Cave at least its not snowing outside of it!

Polystyrene Capers - Take 2!

More polystyrene capers with the last of the scenic sub-bases being constructed for my Last Great Project Layout. Similar to the one I built last week, scrap polystyrene was cut to shape and glued into the mounting card 'box'. Some tooth pick nails and masking tape helped keep things in place whilst the glue dries.

Being somewhat brazen, this was taken into the warmth of house to speed the glue drying and is in the kitchen until Mrs. Woody tells me to move it!

Hmmmm! Soup! Now that's an idea for a wet and cold day. If only it wasn't needed to act as a weight!

Wet, wet, wet!

Wet, wet wet! Not the boy band from the 90s but the prevalent climatic conditions at the Rocks By Rail Museum. 

Given such weather, I could have been sensible and found a job in the dry of restoration shed giving Andy a hand cleaning the running gear of loco 1931....

.....or doing something with loco Barrington....

...or even helping John out with fettling the brakes on loco Mr. D!

I could even have done some of the jobs on this rake of brake vans and wagons where I could have been in the dry of one of the brake vans....

I might even have considered doing something on the cab or water tank of loco 1931 which are temporarily stored on wagons awaiting repatriation with the rest of the loco once the boiler returns from being retubed.

However, being pessimistic and not having faith in the weather forecast I decided to try out Benny Brush Cutter! Similar to Sammy Strimmer, but Benny has a metal cutting disk instead of strimming cord. I thought that this would be a major step forward in the arty of vegetational butchery down in the bone yard. Having managed to awake it from several years of slumber since it last saw action off we went. The rain appeared to be getting less heavy so I thought that I was on a winner. I had to tackle a different area of the bone yard as there were dog training activities going on where I was intending to be but that was not a problem. I did uncover some interesting 'lost items' such as this engine!

There was also a door, some wheels, pipes and an assortment of yet to be identified metal parts!

I also began to uncover part of some remote point control mechanism.

But by this time I was extremely wet and lunch beckoned in the dry of the Snap Cabin! I was that wet that I abandoned going back down to the bone yard and instead sorted a couple of small inside jobs out and them it was home time with the car heater on full blast to try to dry me off! I still had a great day though!

The signal box finds its home!

I have managed to put together the mounting card 'box' for the last scenic sub-base that I need.

Built in my usual way but the floor does have a cut out in the form of that rectangular bit and that is where the 3D printed signal box will finds its home. A trial fit of the 'box' and placing the signal box in the cut out gives a reasonable idea of how things will look once finished,

As I hoped it looks 'right', well, to me anyway! The next stage is some more polystyrene capers to fill in the 'box' and then I will carve that and the other one I built a few days ago to shape ready for plaster bandage. I foresee much mess!

3D print signal box.

At the Lincolnshire Model Makers Show that I posted about earlier this week I did mention I made a few purchases. One of these was from my friends at 3D printing for charity who support the Lincolnshire Air Ambulance. Eddie told me that they have now raised £4000 which in effect pays for a flight of the helicopter which is great going. Anyway, a further purchase goes towards the next £4000 and it was this signal box.

I like the proportions and design which is probably why it appealed to me opening my wallet under the supervision of my Financial Advisor Mrs. Woody! I still find it amazing that things like this can be printed out and the level of detail as the printers evolve just gets better.

So where am I going to put this? Well, there is a spot on My Last Great Project layout  for it where the last of the scenic sub-bases needs to go and I think it will look just the job once the sub-base is built and the signal box painted and detailed but more about that hopefully tomorrow!

More polystyrene capers!

There are still two more scenic sub-bases to construct on my Last Great Project 00 gauge layout. Having now got some motivation to finish these I have started the second to last one. In my usual construction method, mounting card has been cut to shape to make a 'box' into which which the polystyrene can be glues and later shaped.

As can be seen it is a bit of a strange shape which tested the powers of my measuring skills hence the various pencil marks denoting my various attempts at getting it right!

However, it does fit its intended location!

With that done, it was time for the polystyrene capers to commence! Always a somewhat messy job, but an assortment of polystyrene packing kept in storage, much to Mrs. Woody's bemusement, found its way into the 'box' where it was roughly cut to size and glued with PVA. 

It certainly looks a bit strange at the moment but once carved to shape, with even more mess, and covered in plaster impregnated bandage, it will take on a landscape form! I just need to wait for the glue to dry. Now should I take it into the  warmth of the house to dry the glue and hide it away from Mrs. W??? She will never know - I hope!