The last few weeks has been somewhat busy with other non modelling activities. At the beginning of June I had a Cataract operation which was a consequence of the treatment for my my detached retina which happened last April. My admiration and gratitude to the NHS here in the UK is overwhelming. Their care and treatment, especially at a time when covid has made things much more complex for the NHS, was superb and they saved mine as well as countless other peoples sight.
The good weather and light evenings of the last few weeks has also meant that I have spent a great deal of time continuing to landscape the garden and sort out the accumulated junk that I have horded over the past decades. Two trips to the scrap yard this week saw me take 450 kg of scrap metal to weigh in and a bewilderment as to why I had kept such junk for so long! Anyway the landscaping is done (mostly) and I now have an easier to maintain garden and hopefully something that looks better!
Hmmm! You could build a garden railway along that wall!
Smudge the cat seems to be surveying the possibility!
One of those things that I had to do with landscaping the garden was to level off the lawn to the same level as the edging blocks that I laid. Mostly this involved lowering the lawn. If like me trying to cut a turf to a consistent depth turns out to be impossible with what emerges on the end of the spade being more cheese wedge shaped then flat bread, you will understand the problems of having to relay turfs which all have different depths to them. years ago I would have re-laid the turf and belted hell out of it with the back of the spade to get it to some resemblance of level and then wonder why it died! As I get older such energetic activities are now beyond sensibility so with a bit of thought I created a turf cutting plank. I had an off cut of laminate flooring to which I nailed three pieces of inch and a half batten. The picture below shows it as well as the general idea of how to get consistent level turfs using an old and expendable saw riding along the top of the battens to cut off the surplus soil. You won't be using the saw for any form of woodworking again but it certainly made relaying the turfs much easier! The laminate floor is about the same width as my small spade which made cutting the turfs to the right width easy as well. Working smarter not harder as I get older!
The good weather has now however broken and as with all UK summers the rain has arrived! This however has given me the chance to move myself into the dry of The Room of Gloom and make some progress on the Last Great Project which is my 00 gauge model railway and in effect start to play! The four segments of the baseboard are now bolted together with some M12 bolts and large penny washers to spread the load.
If I were organised or had some common sense I would have a hard copy track plan of what I was going to do. However I don't have hard copy but I do have in my mind the basic concept. As with most of my projects I know the basic concept I then work out the details as I go along. It may not be the best way but it works for me! So at the moment I have pieces of track laid out in roughly the layout I want it and it is now a case moving pieces about until the optimal layout appears.
Apparently its going to be raining for a few days yet so rather than stop my play more progress may actually be made!
