3D Printed Crane finished!

Sometimes you just have to take a moment and look in wonder! Yesterdays view was stunning, but no finding that pot of gold at the end of the rainbow even though it looked just a few hundred yards from my vantage point!

 

Maybe if I had a crane I could lift myself to the end! And talking of cranes, despite the continued mess in the reorganisation of the Man Cave, I did manage to finish the 3D printed crane! First off was to colour in the bricks of the plinth using my various coloured pencils.

Then the crane was treated to a wash of Citadel's Nulin oil which I had found during my reorganisation!

Once that was dry it was time for some rust and dust weathering powders to be applied with a soft brush to both the crane and plinth.

Once that was done the plinth and crane were treated to a coat of matt varnish. After that I just highlighted some of the edges of the crane with a dry brushing of gunmetal grey which just makes the detail stand out a bit more. I think it looks good!

I fought the lawn and the lawn almost won!

Thursday at the Rocks by Rail Museum was a day where my battle with the grass was nearly lost with the mower breaking! The front wheels are driven and they pull the mower forward. Well they did until the mower stopped suddenly. Investigating I could turn the wheels 355 degrees in either direction but then they would jam. Time for the tools to come out!

Cover for the drive belt off , wheel off - no going back now!

The ever resourceful John gave me an airline to clean the parts up.

With the muck air blasted out of the way the culprit was discovered. A small stone had got between two of the gear teeth preventing the gear turning. Flicked out with a screwdriver all was well.

A through testing followed and the lawn lost!

Meanwhile these tw wagons had appeared in the platform. Looks interesting and worth a closer look.

What is that poking over the top?

I think that the vegetation is wining here! No I am not going to take the mower in and cut it despite the suggestion that I should!

I later found out that the wagons had been moved to get the tool van out as the track in the platform had subsided slightly and needed packing and jacking.

The track is jacked level with a hydraulic jack and then the ballast is compacted around the sleepers to support it in that level position. Just glad I was battling the lawn and not the track!

Lucky to know Ray!

Leaving the bombsite of my Man Cave in its early stages of being moved around I had a day at the Rocks By Rail Museum. In one of those humbling moments, Ray Bennett, one of the Museums great volunteers brought in something to show us. He is a member of the Saltby Airfield History Group, the airfield being located in Leicestershire and was active as a military base between 1941 and 1948 and is still in use today as a gliding centre. Being built as part of World War 2 it has an extensive history including being the base to America’s 9th Troop Carrier Command during 1944, flying paratroopers of the US 82nd Airborne Division to Normandy as part of the liberation of Europe. With the D Day celebrations last week, members of the American military visited the airfield and in amongst other things presented Ray with a plaque for the Airfield History Group.

Despite his youthful looks, Ray is of an age where he lived through the war years and with so few left who have done that, what better person to accept the plaque. 

I am very lucky to know and volunteer with people like Ray!

There is a full run down on what went on at the airfield last weekend on the South Kesteven Website located here.

 

Having a move around!

Playing in the back of my mind for some time has been a certain desire to rearrange the Man Cave. Put simply I have too much stuff but I am sure there is a better way to arrange it! So at the moment the Man Cave looks like a tornado has struck!

It is never easy reorganising and there is a few days work but out of the carnage will come some sense of normality - to satisfy me anyway until the next move around!

Cabling up!

Getting back to some actual model making and picking up on the 3D printed crane, things have moved on. Having already made a hook I needed to attach that to the crane with a cable. Now you can use cotton or a thread of some kind as the cable but they tend to curl and not look very realistic. Not great seeing your supposed heavy hook being curled upwards by the cable! So , my plan involved real cable - electrical cable!

Some scrap cable was found and a suitable length cut off. The plastic sheathing was sliced off revealing the several strands of thin wire.

From the bundle of wires a single strand was extracted and putting against the crane looked right.

Carefully winding the strand of wire around the winding drum required patience as it needed threading through the cranes structure as well!

I was going to cover the whole drum width but after 40 minutes I had enough! There was sufficient cable on the drum and enough left to attach the hook to. I had also primed the plinth that I had previously made ready to be painted up.

With some spots of superglue to hold the cable in place the cable was taken over the pully at the end of the jib and the hook now hangs nice and vertical! It all needs weathering and griming up now but that is a job for another day!

 

Unexpected task!

Asa with all things that get old, like me, parts occasionally fail! In this case it wasn't me that failed but the 12 volt plug on the lead out of my DCC controller to the track. It quite literally just snapped off but I guess after nearly 20 years of being pulled and bent it was going to happen. However it was an unexpected task to do in my hectic lifestyle - please note Mrs. Woody!

The problem is that these factory supplied leads are not designed to be maintained so the cover to the plug has a plastic shroud welded on. I don't have a spare plug so I was left with having to do a bodge job by slicing the shroud in half. As this is a 12v wire I am not to worried but I would not be doing this as part of a repair on the mains side of the controller.

This is the plug on the right. On the left is the heatshrink that I will used to put around the sliced through shroud.

Wires soldered onto the now exposed innards to the plug.

The sliced through shroud back in place but no way will it seal the innerards!

Heatshrink applied and shrunk. It may not look pretty but it works!

 

Now I wonder what unexpected tasks Mrs. W has lined up for me?

Warning - Chocolate will make your clothes shrink!

I always like a good sign and this one on the platform fence at the Stapleford Park Miniature Railway caught my eye and made me and Mrs. Woody laugh and we probably need to heed Warning - Chocolate will make your clothes shrink!

Back to the exhibits I just loved this Showman's tractor and living van. Beautifully restored and a real piece of history.

The inside was pure luxury!

Keeping the theme of trucks this 8 wheeler ERF B series caught my eye. I have driven a few of these many years ago.

And the same with this classic Bedford TK.

Tractors were about too!

This Opperman three wheel Motocart caught my eye. A teenager was in charge of it and was really enthusiastic about this piece of history. 

There were plenty of retail stalls and displays like this one by a local Macano club.

Then of course there was the railway! A 10 inch gauge railway run just like the real thing with a 2 mile line fully signaled and run by steam locos in the main.

The locos are all replicas of real ones.

The guard gets a 'comfy' seat whilst passengers have to sit on the wooden benches but it is worth it!

Not running on the day but there are some diesel locos to.

This was my favorite loco. A USA outline steamer built in America as the builders plate states.

A great afternoon out and so much variety! Must remember to go again next year and also remember that chocolate will make your clothes shrink!