You always learn new things!

I did find time to get out to my Man Cave for a short while and this is the sum of what I managed to produce!

More etched parts for the Tiger turret stowage bins. I did actually make a bit of a break through in dealing with these small parts in that instead of try to hold both parts using my hands and get the pivot points of the one part into the holes on the other I taped some making tape to the workbench and fastened one etch part to that it was held steady. Made it much easier. 

You always learn new things! Just wish I had learnt that years ago!

A bonus find of £1.05!

 Another day at WMD Recycling! This time the old washing machine was subject to reverse engineering! It is surprising just how much space a machine takes up when in bits!

Once it was all tidied up and sorted there is a a fair amount of metal including a 5p and a £1 coin found in the filter - bonus find!

Inside, the kitchen is so near to being finished that tomorrow should see it done with just a few painting jobs for me to do - as well as the fact that Mrs. Woody has now deemed that every other room now requires repainting! Great!

Today saw Phil the builder finish off the floor that leads out of the kitchen and down the hall. It makes the place feel bigger and as Mrs. W has pointed out it is easy clean so my cleaning tasks will be easier! Fantastic!

What would be more great and fantastic would be to get out in my Man Cave and finish that Tiger. Maybe tomorrow and maybe I can get another kit with that £1.05 bonus find!

Reverse engineering!

As a day for doing any model making today was not the day! However I did reduce the old cooker into kit form using a screw driver and pair of pliars in my reverse engineering escapades so that could count as some form of reverse kit building! It is actually quite interesting to see how something has been put together - a good insight into both design and engineering - whether it is reverse or forwards!.

Meanwhile, whilst I have been reverse engineering, Ben the electrician has fitted a new consumer unit as the old one which was state of the art 32 years ago is now classed as barely adequate - a bit like me!

Wish I could wire that neatly!

In the kitchen itself things are progressing with handles and splash backs being fitted and held in place with clamps and wood so it still looks a work in progress. One thing is certain though, I don't want to reverse engineer that kitchen - Mrs. Woody certainly would have words to say even if I just mentioned it!

Abraded, worn and weathered - and that is not me!

A great day at WMD HQ as the kitchen rebuild skip has now departed! That does not mean that the Kitchen rebuild is complete, just that the skip was as full as it was safe to do so!

The skip had obviously been recently painted and with its shiny paint yet to be abraded, worn and weathered by use and nature. The Tiger has also recently been painted with a clean looking coat of paint that will be abraded , worn and weathered by me!

First I need to finish the turret though but this project is moving on again!

Where has the year gone?

Whilst a cliché,  the phrase 'where has the year gone' did strike me yesterday evening as I put up the banners for one of the final events at the Rocks By Rail Museum this year.

Hopefully it and the other two remaining events will be good ones! In one way I will be glad when the season is over as I won't have to make the adaptations to last years banners to save on the cost of new ones! Then again will next year mean I have to adapt the already adapted banners? 

Whilst I mull that over in my somewhat confused mind, more progress with the Tiger build with the hull now being fully primed.

Before I prime the turret I thought I would confuse my already confused mind further by trying to put together the brass etch latches on the storage bins. These are so small that my camera doesn't seem to be able to focus on them! However one is partly in place so just three and a half and my sanity to go!

 

More of the etched brass to brass me off!

Things are moving on with the Tiger build but there have been some more etched brass parts to fit. One largish piece that has laid in the box for some time mystified me. I had been looking at the plans for some days to find where it went as I did not recognise what it was supposed to represent. I thought it was a grill mesh but I finally found it on the plans and it all clicked! It is designed to replicate the zimmerit coating over the join of the deck to the lower hull. Easy once you know!

It was glued down just by melting the plastic surface with some liquid glue and gently pressing the part in. You can also see that I have rammed some tissue paper into the drivers vision block to mask the clear part behind it. One of those things about digital photos is that they pick up things that my aging eyes miss. In this instance I did not realise that the bow gun moulding even has a representation of the barrel being a tube! Must go to Spec Savers - usual disclaimer in that other vision enhancing purveyors are available! 

Talking of eyesight, mine was really tested along with my sanity by these padlocks. The main body is plastic and the shackle is a brass etch. You can see the sizes involved by scaling with the scalpel. Doing a few of these can really brass you off!

 

After an hour the four etches were glued with super glue to the plastic bodies. Again, digital photography is not forgiving! Whilst this close up may show some crudeness in assembly, at normal viewing distance and with aging eyesight they look fine!

I had a few minutes to start priming the main hull in my usual black colour. It needs a few more coats but it does provide a good base for the top coats.

Tiger hull glued!

It has been a busy, interesting and varied week. Getting over Norovirus, the kitchen rebuild, working at the museum and making some progress with the Tiger tank rebuild. 

The Tiger now has a glued together deck and hull following some final fettling with the bow gun and masking off of the two forward hatches and the turret aperture. 

The fitting of the deck to the hull was not without a few near miss contributions to the swear jar but it all eventually went into the right places. With some liquid glue seeped into the joints it was all successfully held together.

With the hull and deck together it was time to fit the side track guards - a fiddly but greatly rewarding task once done as the pair really added to the character of the tank..

Placing the turret on top of the hull shows what a beast this tank was.

Hopefully getting to this stage makes the rest of the build a bit easier but that is never my luck!

Woody meets a blog reader!

A day at the Rocks by Rail Museum today but lets talk Tiger tank kit building first where the steps towards getting it finished have become somewhat glacial in speed! However, it is not always about the speed, but about the journey itself. Just wish this one was a bit more interesting at the moment! The bow gun has been painted and is in place and the clear vision block for the drivers position is in place.

To help in the painting process and to try to avoid painting the clear vision block and blasting paint over the bow gun I have just hand brushed some base colour around the required places. Whether it works or not is something I will find out later! 

Meanwhile at the Rocks by Rail Museum, things are looking very autumnal with fading greenery, a low sun and long shadows. But on a day like today there was no better place to be! 

And interestingly I met someone who reads this blog! That was a surprise to me, both that someone other than Mrs. Woody and Mr. Beecham reads it and to actually have met them! A great chat was had and thank you Margaret for taking the time to read my ramblings!

The Museum played host today to a short commemoration alongside locomotive Singapore of the allied losses suffered when two Japanese Hell Ships were sunk. You can read more about that on the museum website by clicking here! For me a poignant moment as my Uncle was captured in Singapore during WW2.

As always, white orchids were laid by thoose present and the poem below tells why.

The work of the museum does of course continue and Alex is still making progress on Ketton No1 having moved onto painting the engine bay and all the ancillaries. It is somewhat concerning in my mind that he may finish painting this loco before I get my Tiger kit finished!

For me, the grass never stops growing so it was a day of mowing! How unusual!

Running water!

This picture marks a massive step towards completion of the kitchen rebuild and my return to more model making - unless Mrs. Woody has other plans!

However getting to that point took both Phil the builder and myself on a journey neither of us had been on before. Having installed the waste pipes - always best to get those in before the running water is connected - Phil connected up the water. Testing the connections, the cold ran and the hot ran, both without leaks. Great! Turn the two on together and all was well for two minutes before the overflow at the top of the house started gushing! Not great! Phil had never seen that before and neither had I. What was going on? We had running water in two places! Phil had a theory which was backed up by my perusal of the internet. 

The issue was that the cold water was being supplied straight from the mains at a high pressure. The hot on the other hand was supplied from the hot water tank upstairs using gravity and its pressure was low. Inside the mixer tap, when both the hot and the cold were turned on full, the outlet of the tap could only allow a certain amount of water out which was less than the water being supplied by the cold and hot inlets. Therefore the cold water, with its much higher pressure, was able to backfeed into the hot pipe and push the water back into the hot water tank. The hot water tank then needed to expel the excess water which it did through its feed from the cold water tank in the loft. The cold water tank then had to get rid of the excess water through its overflow pipe hence the gushing water we saw outside.

The answer was a one way valve on the hot supply which Phil had one of in his van - almost as good as WMD Stores! Once fitted, the problem was solved and we only had running water in the sink! 

Gunning it!

Gunning it usually means putting your foot down on the car accelerator and moving off at a fast speed. In this case, and as is usually in Woody's World, speed is usually slow! However at least there is movement and on the Tiger 1 build there is just one last piece that I need to finish in order to glue the top of the hull onto the lower part and that is the bow gun. Not a big part but it will be seen through the open hatch above it so I managed a few minutes to start getting it ready for painting. A few sprue mountings need sanding and then it is time to get the paint out. Once it is installed then the whole tank can begin the paint process. No doubt that process will probably be as slow a process as the masterpieces produced by the great artists of the World only my end product won't be a masterpiece!

And despite trying 'gunning it' on the model build it is the kitchen rebuild that is actually moving on quickly now with Phil the Builder, with my assistance hindrance now having got all the worktops joined and in place complete with the hob plate in position.   

The joins between the worktops are all but invisible and to see the way it is done is quite an eyeopener. Definitely something that I could not have achieved if I had done it! However I did have to lend Phil one of my model making needle files to carry out some fine adjustment to the joins so I at least felt as though my assisatnce hinderance had been of some use!