It was the art of soldering for me and doing one of those long outstanding jobs that exist on my (not Mrs. Woody's list!) list of things to do. It was to solder up a phono plug to connect the power from my DCC controller to my 009 narrow gauge layout Chalkdon. Prior to this momentous moment I had used a pair of crocodile clips which was not really the best way to do things!
With this job done I can easily move the DCC controller from this layout to my USA switching layout for which I soldered up a similar plug some time ago. Amazing how time flies by!
Just out of interest, the Kato track that I posted about yesterday has a discrete means of plugging a power supply in with this socket under the track into which the ready wired power wires just plug into. That is an artful solution!
More art on the canal which I have posted about recently in the form of the art of finding more wrong than you originally thought! Out on a bike ride I stopped off to see how things were going. More Hi Viz present and an overheard remark of 'well its rotten' which I presume is part of the lock gates which can now be inspected with the water level so low. No doubt more art will follow with the art of repairing!
Finally we have the art of realising it is just going to happen and perhaps sat navs are not that good! Whilst travelling through the Lincolnshire town of Grantham which has the East Coast Main Line railway bisecting it with several low bridges I got caught up in traffic which was at a standstill not because of the road works but due to that truck the other side of the bridge. The driver was trying to make a 180 degree turn onto a side road that goes under the arch on the far left of the picture below.
He gained a bit of an audience over the five or so minutes that he tried to turn the truck but eventually he gave up and drove off probably with a health deposit in his dashboard sware jar!
Right I am off to practice the art of making Mrs. W's dinner!
No comments:
Post a Comment